Manual and CNC Turning

Our variety of turning centers enables us to create complex and precision round parts.
This allows us to pair your part needs with precisely the right tool.

The HAAS DS-30Y Y-axis Turning Center combines dual-spindle turning with Y axis, C axis, and live tooling to create a powerful “done-in-one” machining solution. Off-center milling, drilling, and tapping operations are possible for increased machining capabilities. It includes a 12-station BMT65 turret and synchronized C axis for versatile 4-axis capability. The opposed spindles, with Ø3” bar capacity, support fully synchronized turning, and allow on-the-fly part pass-off to reduce cycle times.

The MAZAK QTS 300M CNC Turn/Mill has a Ø12” Chuck or Ø3.0” Bar Capacity and Live tooling for on-center milling operations such as flats, cross holes and face holes to eliminate a separate milling operation.

The HAAS ST25Y Turning Center with Live Tooling has a Ø10” Chuck or Ø3” Bar Capacity and 22.5” long cutting capacity and 4” of Y Travel for the Live Tooling, allowing us to eliminate the need for another setup to complete many simple milling operations. This reduces setups, handling, and processing time.

The HAAS ST25 2 Axis Turning Center has a Ø10” Chuck or Ø3” Bars Capacity and 22.5” long cutting capacity for quick, accurate process of parts that don’t need additional milling operations.

Our Trak Lathes (TRL1845SX; TRL1630SX; TRL1840SX) have capacities up to Ø18” x 45” with chucks and collets for low-volume parts and secondary operations on others.

The HAAS DS-30Y Y-axis Turning Center combines dual-spindle turning with Y axis, C axis, and live tooling to create a powerful “done-in-one” machining solution. Off-center milling, drilling, and tapping operations are possible for increased machining capabilities. It includes a 12-station BMT65 turret and synchronized C axis for versatile 4-axis capability. The opposed spindles, with Ø3” bar capacity, support fully synchronized turning, and allow on-the-fly part pass-off to reduce cycle times.

The HAAS ST25Y Turning Center with Live Tooling has a Ø10” Chuck or Ø3” Bar Capacity and 22.5” long cutting capacity and 4” of Y Travel for the Live Tooling, allowing us to eliminate the need for another setup to complete many simple milling operations. This reduces setups, handling, and processing time.

The HAAS ST25 2 Axis Turning Center has a Ø10” Chuck or Ø3” Bars Capacity and 22.5” long cutting capacity for quick, accurate process of parts that don’t need additional milling operations.

The MAZAK QTS 300M CNC Turn/Mill has a Ø12” Chuck or Ø3.0” Bar Capacity and Live tooling for on-center milling operations such as flats, cross holes and face holes to eliminate a separate milling operation.

Our Trak Lathes (TRL1845SX; TRL1630SX; TRL1840SX) have capacities up to Ø18” x 45” with chucks and collets for low-volume parts and secondary operations on others.

Sirois Tool is the expert provider of a full range of turning and turn/mill services.

Contact us or call us at (860) 828-5327
for a competitive quote on your next project.